The Top 3 Ford Mustang Fox Body Coilovers
The Fox Body Mustang is an incredibly popular platform that was light, nimble and fast, and has loads of potential whether you are looking to drag race, auto cross, or just want a car you can enjoy.
One of the best upgrades you can do to your Fox Body is to install a set of coilovers. In this post, I’m going to explain the benefits of doing so, as well as give you 3 of the best coilover options for the Fox Body Mustang on the market today.
Benefits of Installing Coilovers on your Fox Body
Installing coilovers on your Fox Body is going to make a tremendous improvement to the handling of the car, as well as help with tyre grip, and give you the ability to make adjustments to get the setup just right.
Fox Bodies also tend to suffer from wheel hop, especially when putting down a lot of power, and coilovers are one of the things that are going to help reduce this.
Installing coilovers will:
- Give you adjustability over the ride height settings
- Significantly improve handling
- Depending on the coilover model, allow you to fine-tune the damper stiffness to suit your needs
- Help to reduce wheel hop
- Increase tyre grip
- Potentially even increase ride comfort
Other Modifications You Should Do Alongside Coilovers
Strut Braces
When installing coilovers, you’ll also want to install a strut brace, ideally one that also ties in to the firewall. Coilovers are going to add more load onto the strut towers, which can cause them to flex quite significantly during cornering.
It is also possible for the strut towers to break, which will cause your suspension to come out through the hood. This is because the strut towers weren’t designed to handle the load of springs, so adding some strengthening is a good idea. A strut brace will help with this also.
You can get a Fox Body strut brace here.
Subframe Connectors
Although not technically related to the coilovers, a set of subframe connectors which tie the front and rear subframes together are going to significantly improve the handling of your Fox Body.
Said to be one of the best bang for buck upgrades, they will stiffen up the entire chassis, reduce flexing and create more responsive and consistent handling.
You can get Fox Body subframe connectors here.
The Best Coilovers for the Fox Body Mustang
Right, now that I’ve shown you the benefits of installing coilovers, here are 3 of the best coilover options for the Fox Body Mustang.
BC Racing BR Series
Price: $1445
I’m kicking off this list with the BC Racing BR Series because not only is this one of the most popular coilovers on the planet, it’s also extremely good value for money.
The BR Series are BC Racing’s entry level kit and are designed as a street coilover that can handle track use. They are the perfect all-rounder that can handle both comfortable daily riving and track duty, all for a great price.
They come with monotube dampers with linear valving that give you 30 levels of dampening adjustment (simultaneous compression/rebound), allowing you to fine tune the ride and handling to suit your requirements and quickly change when necessary.
Ride height adjustment is done by the shock body, which means you retain full suspension travel at all heights, which makes for a more comfortable ride, means the dampers will last longer if you are running low, and will allow you to corner balance the car.
The regular kit gives you lowering from 1 to 3 inches and if you opt for the Extreme Low option, it will go up to 4 inches lower than factory.
One of the things that makes these kits so popular is that they are highly customizable. From custom spring rates and valving, to Swift Springs, Extreme Low option, front and rear camber plates (on applicable models) and more, you can put together the perfect kit to suit your needs.
These coilovers will take almost anything thrown at them, with countless people worldwide using them on everything from daily drivers to track cars.
They also come with a 1 year warranty and are fully rebuildable, with BC Racing selling all the individual parts to do the rebuild.
When you take everything into account, from their great reputation to their customizability and excellent value for money, you will struggle to find a better kit out there.
Features include:
- Ride height adjustment by the shock body
- Lowers ride height from 1-3inches, Extreme low option goes 2-4 inches
- 30-level adjustable dampening (compression/ rebound simultaneous)
- Monotube dampers with linear valving
- Fox Body spring rates: 8 Kg front, 7 Kg rear
- Rebuildable with all parts purchasable from BC Racing
- Custom spring rates and valving available
- Swift Spring upgrade available
- 1 year warranty
You can get the BC Racing BR Series for the best price here:
GET FOX BODY BC RACING BR SERIES FOR THE BEST PRICE HERE
KW V1
Price: $2254
If you are looking for a high quality street coilover for your Fox Body, the KW V1 is a great option.
The V1 kit is designed as a height adjustable kit to allow you to set the ride height to your liking and enjoy a comfortable ride.
While these don’t have dampening adjustment, KW has spent a lot of time fine tuning the dampening settings for each specific vehicle in order to give you the best ride comfort and performance possible.
KW is well known for their extremely high build quality, and one of the things that make their kits so good is the INOX-LINE stainless steel shock bodies, which have been salt spray tested for 220 hours to make sure they will never rust.
Combined with the special composite spring perches that KW has developed, these coilovers will endure the harshest weather and will never seize. KW backs this up with a lifetime warranty.
The V1s are definitely a quality coilover kit, and if you are just looking for simple ride height adjustment for your daily driver or street car and don’t need to adjust dampening settings, this kit is for you.
The V1 features include:
- Ride height adjustment by spring perch
- Lowers 1.4-2.5 inches front, 0.9-2.1 inches rear
- Proven, high quality construction that will not rust or seize in all weather conditions
- Springs and dampers fine-tuned for each vehicle
- INOX-LINE stainless steel shock bodies
- Composite spring perches
- Made in Germany by KW
- Limited Lifetime Warranty
- Fully rebuildable
You can get the KW V1 here for the best price:
GET FOX BODY KW V1 FOR THE BEST PRICE HERE
Godspeed MonoSS
The Godspeed MonoSS are an excellent option for those on a budget.
These coilovers are specifically designed to offer the perfect balance of performance and affordability, and give you a surprising amount of features given the low price.
The dampers are 52mm monotubes made of “carbon seamless steel” which give you 16 levels of dampening adjustment. They feature “racing grade shock oil with a high viscosity index” and a “Performance Internal Piston” according to Godspeed, and are designed to handle street driving as well as occasional track days.
The springs are made from high strength SAE9252 steel, and ride height adjustment is done by the shock body to ensure you have full suspension travel at all heights. They typically give you 1-3 inches of lowering from stock, depending on the model.
The MonoSS also come with pillow-ball strut mounts with Koyo Japan bearings which are camber adjustable on applicable models. Some vehicles use the factory strut mount.
They come with a 1 year warranty and the dampers are rebuildable.
Considering the low price and many positive reviews to be found for these coilovers, they are a great option if you are on a budget but still want a decent coilover that can handle occasional track use.
Features include:
- Ride height adjustment by the shock body,
- Lowers 1-3 inches lower than stock on most models
- 16-level dampening adjustment
- Fox Body spring rates: 8 Kg front, 5 Kg rear
- Monotube dampers with racing grade shock oil and performance piston
- Pillowball strut mounts with camber adjustment on applicable models and Koyo Japan 6204z bearings
- Anodized shock bodies
- 1 year
You can get the Godspeed MonoSS for the best price here:
GET FOX BODY GODSPEED MONOSS FOR THE BEST PRICE HERE
Conclusion
I hope this post has helped you to find the right coilover for your Fox Body. If you have any questions or would like to suggest another coilover from this list, feel free to post in the comments below.
Cars owned: Mk2 Golf with 1.8T swap, BMW E28 with M30B35 swap, BMW E36 328I Mtech, BMW 750IL, Nissan 300ZX, Honda Civic EF
- BC Racing BR Series VS Tein Flex Z Coilovers - April 15, 2024
- The Pros and Cons of Shock Body Vs Spring Perch Coilover Height Adjustment - April 13, 2024
- Monotube Vs Twin Tube Shocks: The Ultimate Guide - April 11, 2024
