In this video I show you how I marked out, cut and installed custom vinyl stripes on my Honda Civic EF. I also show you how to use the wet application method for installing vinyl. Things You Will Need…
If you are looking to relocate your car’s battery to the trunk, you are in the right place. In this post I’m going to show you exactly how to do it along with all the parts you will need…
In this video I will show you the process of bedding in new brake pads and discs when you have installed new brake pads and rotors on your car. This process applies whether you have installed new rotors and…
Here is how to replace the front brake pads on the Honda Civic EF and CRX. Tools You’ll Need: 12mm socket & ratchet Caliper piston tool or adjustable pliers Flat head screw driver (to pry out the old pads…
Here is how to remove the steering wheel on a Honda Civic EF and CRX, and how to install an aftermarket steering wheel. Tools needed for this job: Removal: Thin flat head screwdriver 19mm socket with ratchet and extension…
Here is how to remove the door cards (interior door panels) from a Honda Civic EF (87-91) and CRX (83-91). Here are the location of all the screws you will need to remove. They are all Phillips head. **NOTE:…
Here’s how to test if the throttle position sensor (TPS) on your Honda is operating correctly. This will work for most 90s Hondas including Civic, Integra, CRX, Shuttle etc that have D15, D16, B16 etc engines. You will need…
Here is how to remove the rear bumper on a Nissan 300zx Z32. Should take you an hour or less to do this. Tools you will need: 10mm socket Phillips head screw driver Needle nose pliers or pry tool…
After trying out various methods I found what I consider the best way to remove etched water spots from car glass windows. My 300zx had super bad water spots and this method worked well. What you will need: Fine steel…
